XT1

Cold-Applied Chemical & UV Resistant Elastomeric Monolithic Membrane

XT1 is a hand-troweled or squeegeed, two-component, chemically resistant, UV and environmentally stable monolithic coating that is especially well suited for applications requiring a super tough sealant, including airport runways.

Exceptionally chemically resistant, XT1 is suitable for chemical containment pits and secondary containment systems.  XT1 is also approved for potable water, which makes it suitable for use in reservoirs and water storage tanks.

XT1 is fast curing and may often be placed in service within two hours, depending on job requirements and environmental conditions

XT1 Monolithic Membrane

XT1 COATING SYSTEM

Forms a durable elastomeric liner. Able to bridge cracks and joints and withstand continuous movement.

Impervious to water and most liquid chemicals.Provides a long lasting solution for tank and pond liners.

Adheres to and bridges common construction materials such as concrete, steel and other metals, asphalt, pavement, glass, wood and most coatings. Versatility in range of applications.

Complies with the most stringent VOC Regulations and is environmentally & California friendly. Can be repaired if damaged. Ideal for severe wear applications.

UV Stable. Resistant to damage from prolonged UV rays.

Liquid, two component urethane. Can be applied to complex shapes, multiple penetrations, or to most geotextiles.

System Overview:


System Components:

XT1

Plural component, cold-applied, chemical & UV-resistant elastomeric monolithic membrane

PDS SDS

XT1 EMT Primer

Moisture resistant, 2-part, epoxy primer for concrete and metal surfaces

PDS

XT1 Bonding Agent

A VOC compliant substrate adhesive promoter for XT1

PDS

XT1 Scrim

A light weight spun polyester reinforcement for XT1

Versadex FB

Fabric-backed, chemical, environmental, and temperature resistant butyl detailing tape.

Available widths: 6", 12" & 18"

PDS SDS

Rust Shield

Pre-Primer water-based oxidation converter and protection coat for rusted and oxidized metal surfaces.

PDS SDS

K-Drain 300-302-1000

For extreme compression-resistant situations:
0.25" - 8.5 gpm/ft
HDPE geonet drainage core with bonded filter fabric that is flexible and virtually crush-proof (up to 40,000 psf)

PDS SDS

K-Drain 400 Series

For vertical protection of waterproofing systems:
0.40" - 21 gpm/ft
Dimpled, high flow, impermeable HDPE drainage core with a bonded later of nonwoven fabric

PDS SDS

K-Drain 700 Series

For horizontal protection of waterproofing systems:
0.40" - 23 gpm/ft
Heavy duty, high flow, polymeric dimpled drainage core

PDS SDS

K-Drain 990

For chemical exposure applications:
0.40" - 24 gpm/ft
Chemically resistant, heavy duty, high flow, impermeable HDPE dimpled drainage core

PDS SDS


System Details:



Want to hear more? Have questions?